Soda Ash – Sodium Carbonate
pH Adjuster · Cellulose Scouring Agent · Mordanting Auxiliary
Soda ash is an alkaline mineral salt used throughout natural dyeing to scour cellulose fibres, raise the pH of selected dye baths and assist in particular mordanting and indigo-vat recipes.
It is especially useful for cleaning cotton, linen and hemp before mordanting. It removes oils, waxes, pectins and processing residues that can prevent even mordant and dye uptake.
Soda ash is best suited to cellulose fibres. Hot or concentrated alkaline solutions can damage wool, silk and other protein fibres.
At a glance
| Feature | Details |
|---|---|
| Product | Soda ash |
| Chemical name | Sodium carbonate |
| Formula | Na₂CO₃ |
| Grade | Textile |
| Form | White alkaline powder |
| Main uses | Cellulose scouring, pH adjustment and selected mordanting processes |
| Scouring quantity | Approximately 3–10% WOF |
| Best suited to | Cotton, linen, hemp and other cellulose fibres |
| Solubility | Water-soluble |
Choosing between soda ash and potash
Soda ash and potash both provide carbonate alkalinity, but they are not identical and should not be substituted gram-for-gram. The right choice depends on the recipe, storage conditions and intended process.
| Choose soda ash when… | Choose potash when… |
|---|---|
| Scouring cotton, linen, hemp or other cellulose fibres | A recipe specifically calls for potash or potassium carbonate |
| Following a modern cellulose-mordanting recipe | Following a traditional potash- or wood-ash-based process |
| You need a stable powder that is easier to store and weigh | High solubility, including in cooler water, is useful |
| Cost and general availability are important | The potassium component is required by a particular process |
| A recipe specifies sodium carbonate | A recipe specifies potassium carbonate |
Soda ash is generally the practical everyday choice for cellulose scouring and controlled pH adjustment. Potash is useful for specialist recipes, traditional processes and applications where its high solubility is beneficial.
Potash absorbs moisture more readily and may clump or gain weight after opening. Keep it tightly sealed and measure it promptly.
The two products should not be exchanged using equal weights. When either is used to adjust alkalinity, dissolve it separately, add it gradually and check the pH between additions.
Neither product is recommended for scouring wool, silk or other protein fibres. In indigo vats formulated for protein fibres, alkalinity must be adjusted carefully according to measured pH.
Uses in natural dyeing
Soda ash can be used for:
- Scouring cotton, linen, hemp and other cellulose fibres
- Raising the pH of selected dye baths
- Adjusting compatible indigo and woad vats
- Selected cellulose mordanting recipes
- Neutralising mild acidity where appropriate
Soda ash should be measured according to the individual process rather than used at one universal rate.
Scouring cellulose fibres
For cotton, linen, hemp and similar fibres, use approximately:
3–10% WOF - weight of dry fibre
Begin at the lower end for lightly processed textiles. Raw, waxy, oily or heavily finished materials may require a stronger treatment or a repeated scour.
- Weigh the dry textile.
- Wet it thoroughly.
- Dissolve the soda ash separately in hot water.
- Add it to a stainless-steel pot containing enough water for the textile to move freely.
- Add a suitable textile detergent where required.
- Add the fibre and heat gently.
- Maintain a gentle simmer for approximately one hour, moving the textile regularly.
- Allow it to cool safely and rinse thoroughly.
- Repeat if the water remains heavily discoloured or the textile still feels oily.
Use 3-10% of the dry fibre weight, not 30–100g per litre of water.
Adjusting dye baths and indigo vats
There is no universal quantity for pH adjustment.
Dissolve a small amount of soda ash in water and add it gradually while stirring. Check the pH between additions and stop when the range required by the particular dye or vat recipe has been reached.
Not every indigo vat uses soda ash. The standard 1-2-3 fructose vat uses hydrated lime as its alkali. Only add soda ash when it is called for by the chosen vat recipe.
Small alkaline adjustments may brighten or shift weld and other flavonoid yellows, but the result depends on the dye and fibre. Always test a sample first.
Important fibre information
Soda ash is intended primarily for cellulose fibres.
Avoid hot, strong or prolonged soda-ash treatments on:
- Wool
- Silk
- Alpaca
- Cashmere
- Other protein fibres
Alkalinity can roughen, weaken or permanently damage protein fibres.
Storage and safe handling
- Store tightly sealed in a cool, dry place.
- Causes serious eye irritation.
- Avoid creating or breathing dust.
- Wear gloves and eye protection.
- Add the powder carefully to water to prevent splashing.
- Keep away from acids; mixing can release heat and carbon dioxide.
- Use dedicated dyeing equipment—never food-preparation equipment.
- For textile dyeing and craft use only.
- Not intended for food, cosmetic or medicinal use.
- Keep away from food, children and pets.
- Do not release strongly alkaline solutions directly into drains or natural waterways.
- Allow used solutions to cool and follow local disposal requirements.
What you receive
Your chosen net weight of textile-grade sodium carbonate, supplied in a sealed pouch.
Detergent, dyes, mordants, fibres and photographic props are not included.
Learn with us
Join The Natural Dyers & Growers Academy to explore natural dyeing alongside fellow dyers and growers.